Making a DIY photo explosion box is a fun and easy way to create a unique gift for a friend or loved one. This project can be completed in just a few hours, and only requires a few supplies that are easily available at most craft stores. With a little bit of creativity, you can create a one-of-a-kind explosion box that is sure to delight any recipient.
1. Start with a square piece of cardstock. Fold it in half lengthwise and then in half again to create a smaller square.
2. Cut a slit in the center of the square, stopping about an inch from the edge.
3. Unfold the cardstock and then fold each of the four corners into the center.
4. Refold the cardstock along the original folds.
5. Cut another slit in the center of the square, this time going all the way to the edge.
6. Unfold the cardstock and insert your photos into the slits.
7. refold the cardstock and secure the photos in place with tape or glue.
8. Decorate the outside of the box as desired.
What do you need to make a photo explosion box?
An exploding box is a box that has a lid that “explodes” open to reveal layers of inside content.
To make an exploding box you’ll need a few basic things:
-Several sheets of 12 x 12 cardstock (I used 4 for the box itself and 1 for the lid)
-Complimentary scrapbook paper
-Scissors
-A glue stick
-Pictures
-Decorations (I used ribbons and tin boxes, but you could use paper flowers, small bottles, whatever you like)
More items may be needed depending on the design of the box.
Instructions:
1. Cut out four 12 x 12 squares from the cardstock. These will be the sides of the box.
2. Score the cardstock along the middle of two opposite sides. This will make it easier to fold the box.
3. Fold along the scored lines and glue the sides of the box together.
4. Cut out a 12 x 12 square from the scrapbook paper. This will be the bottom of the box.
5. Glue the bottom of the box to one of the sides.
6. Repeat steps 1-5 for the
Making an explosion box is a fun and creative way to show someone you care. Follow these simple steps to make your own explosion box step-by-step.
Step 1: Print out your template of choice and cut where necessary.
Step 2: Fold your explosion box.
Step 3: Glue the layers together.
Step 4: Assemble the lid.
Step 5: Put it all together and personalize.
How many photos do you need for a photo explosion box
This box can hold 36-60 photos and the picture sizes that fit well onto these are up to 54 inches long and 44 inches wide.
These are instructions for how to make a scrapbook. First, you will need to cut three images into two-inch squares. Then, you will need to center one square on each scrapbook paper square and adhere it with a glue stick. Allow the squares to dry. Next, you will need to fit your folded scrapbook paper into the box. If you would like, you can hot glue the back side of the bottom square to the inside bottom of the box. Let the glue dry.
What paper is used for explosion box?
Cardstock explosion boxes are a great way to add a personal touch to any gift. They are easy to make and only require a few supplies. You will need:
-12×12 inch solid colored cardstock (one for each layer)
-12×12 or 85×11 inch printed cardstock (for the lid)
-Adhesive
-Paper trimmer with scoring blade OR another way to trim + score cardstock.
To make the box, start by scoring the solid colored cardstock at 4 inches and 8 inches on all sides. Then, cut the printed cardstock into a 12×12 inch square. Adhere the square to the top of the box. To finish, decorate the box as desired.
To make a paper cube, you will need to:
1. Fold all 4 sides
2. Cut out the crossed area
3. Fold and tape the corners
4. Mark the middle of each side and cut
5. Take a rubber band and pass it through the hole
6. Tie a knot and secure it with glue
7. Repeat on all sides
What are the three ingredients for an explosion?
A simple explosion can be created with just a spark, a fuel source, and oxygen. If these ingredients are confined, the explosion will be much more powerful.
The note is about shaking up a reaction to happen.
What are the ingredients for an explosion
Explosives must contain a fuel and an oxidizer. The most common type of explosive is ANFO, which is a mixture of ammonium nitrate and fuel oil. The fuel oil provides the oxygen needed to sustain the reaction.
To make an explosion box, you will need:
-A large box
-A small box that fits inside the large box
-Decorations
-Design paper
-Small messages or photos
1. Decorate the inside of the large box with decorations and fitted design paper.
2. Fill the small box with small decorative parts and inlays, photos and small messages to suit your chosen theme.
3. Cut out small pieces of design paper for the lid and the sides of the small box.
4. Assemble the small box inside the large box, and decorate the lid and sides of the small box with the design paper.
5. Close the large box and enjoy your explosion box!
How to make a memory box?
Making a DIY Memory Box is a great way to preserve your memories and keep them safe. Here are 5 easy steps to make your own Memory Box:
1. Pick a memory box theme. What kind of memory box do you want to make?
2. Choose a box. The next step is to choose a box. Decide what size and shape you want your memory box to be.
3. Decorate your box. If you are going the DIY memory box route, then you can now decorate your memory box! Get creative and make it your own.
4. Put stuff inside your box. Now it’s time to fill your memory box with all the things you want to keep safe. Make sure to organize your memories so you can easily find them later.
5.Organize your memory box. Now that your memory box is full, take some time to organize it so you can easily find what you’re looking for. Label each section or compartment if needed.
One of the best ways to preserve your old family photos is to scan them and send them to your loved ones. This way, they can enjoy the memories as well and keep the photos safe. You can also frame your favorite prints and create a gallery wall in your home. Another great way to display your family photos is to scrapbook them in modern photo albums. This is a great way to keep your memories alive and share them with others.
How do you make a simple photo box
Our lightbox is simple to make and only requires a box cutter and tape. First, cut out a square or rectangular opening in the top of the box. Then, cover the opening with clear tape. Finally, place a light source inside the box and voila! Our lightbox is complete and ready to use.
You will need a white box, some white tissue paper, and a piece of white poster board. You will also need all of the items on the list.
How do you make an exploding butterfly box?
Take a blue rubber band that’s an eighth of an inch thick And fold it in half around the hook in the center of the spool. Then take the two free ends of the rubber band and tie them together in a knot. Trim the excess rubber band, making sure not to cut the knot.
If you want your homemade projector to work well, it’s important that you use 65 lb cardstock. Regular 20 or 24 lb paper will be too light and see-through, and heavier 80 lb cardstock won’t let enough light in. With the right material, your projector will work great!
Final Words
1. Choose the size and shape of your box. A shoe box works well for a small explosion, while a tissue box is perfect for a medium-sized one. If you want to go bigger, consider using a shirt box.
2. Cover the inside and outside of your box with construction paper, using glue or tape to secure it.
3. Decorate the box however you’d like! You can use markers, crayons, stickers, glitter, or anything else you can think of.
4. Cut a small square or rectangle out of the center of the top of the box. This is where your photos will go.
5. Place your photos inside the box, arranging them how you’d like.
6. Cover the photos with tissue paper, using glue or tape to secure it.
7. Close the top of the box, and your explosion box is complete!
A DIY photo explosion box is a great way to share your photos with friends and family. It’s easy to make and only requires a few supplies. Plus, it’s a great way to display your photos in a unique way.